JimJams

JimJams Antibacterial hand and skin disinfectant spray

Can be used without water and soap, does not dry, does not stick. Immediate protection against bacteria. Despite its high alcohol content, the product does not dry the skin, and after use, a pleasant skin sensation can be experienced. Thanks to its practical packaging, it can be used at home, at work or even in the car. We also recommend it for air travel.

Use

Hand disinfection: Spray the product on the hand so that there are no untreated parts, and rub it thoroughly on the hands. Penetration time: 1 minute. After the penetration time has elapsed, allow the product to dry on the surface of the hand. Skin disinfection: Wipe the skin surface to be disinfected with a sterile gauze soaked in the product or spray it so that there is no untreated area. Penetration time: 1 minute. After the penetration time has elapsed, allow the product to dry on the skin surface.

Storage

In original, intact, unopened packaging, in a dry, cool, well-ventilated, frost-free place, away from open flames and ignition sources, for 24 months from the date of manufacture.

Safety warning

Highly flammable liquid and vapor. Other warnings: For external use only! Keep out of reach of children! Can only be used on intact skin! Do not get in eyes! First aid: IF IN EYES: Rinse cautiously with water for at least 15 minutes, keeping eyelids open and moving the eyeball. If symptoms persist, seek medical advice. IF INHALED: Remove victim to fresh air. If breathing is difficult, seek medical advice immediately. IF SWALLOWED: Rinse mouth with water and drink water. Do not induce vomiting! If necessary, seek medical advice. Waste management: The product residue and the packaging material are hazardous waste. The contaminated packaging material can be treated as municipal waste after cleaning with water. Environmental protection / ecotoxicology: The mixture, its residues in large quantities without dilution must not be discharged into the public sewer. Its entry into natural surface waters, groundwater or soil must be prevented. Pollution remediation: Large amounts of spilled product must be soaked up with an inert, absorbent material (e.g. vermiculite, sand, earth) and stored with appropriate labeling. Flammable material (e.g. sawdust) cannot be used for soaking up. The contaminated area should then be rinsed with plenty of water. Small amounts of spilled product should be rinsed with plenty of water.

Distributor

Alveola Kft.
1143 Budapest, Gizella út 28/A.

Product information

The information provided here for the products is for preliminary information only, after receiving the product you will receive final information based on the label of the product.